top of page

ETA: ETA-17/1064

CPR: 1488-CPR-0724/W

DoP: PIRO/07-2018-09-10

TDS

MSDS

wraptop2aa.png

Piro Wrap PW
 

Size:  55, 82, 90, 110, 125, 160

Intended for:  ​plastic pipes

2ndstage.png

Polymer wrap with an admixture of graphite and other components.

3rdstage.png

Intumescent material placed in a closed pouch made of PVC foil.

pirowrap2aa.png

Intumescent material begins expanding
in the heat
and seals the hole.

Prevents the spread
of fire to adjacent compartments.

Up to EI 120 C/U, U/C

Environment class: Z1, Z2

Intumescent wrap should be stored in a dry place with the temperature ranging from +5°C to +30°C for no longer than 24 months.

1.png
3.png
5.png
wizall2a.png

Range: from 55 up to 160

60 mm or 100 mm width

wraptop2a.png
Description & use
2ndstage.png

Piro Wrap PW is a polymer wrap with an admixture of graphite and other components that make the assembly smooth and flexible and under high temperature it increases its volume closing the aperture with the pipe or cable on which it is wrapped. The wrap has a rectangular shape and is produced in several dimensions of thickness and 60 mm or 100 mm width. Piro Wrap PW is delivered as ready-made product. It consists of one or more layers of intumescent inserts placed in a closed pouch made of PVC foil or similar material. At one end of the bag there is an adhesive strip used to fix the wrap to the pipe. Piro Wrap PW should be wrapped around the pipe and if necessary it can be cut to the required length. Piro Wrap PW should be placed inside the partition.      

Piro Wrap PW is designed to stop fire and perform fireproof sealing of penetration seal in walls or floors through which single plastic pipes (PVC, PP, PE-HD, PE, ABS, SAN + PVC) with a diameter of up to 160 mm. The thickness of the insert depends on the type of pipe material and its diameter. The thickness of the partition through which the installations are carried out should not be less than: - 100 mm - for plastic pipes DN ≤ 110 mm - concrete walls, cellular concrete walls, solid brick walls, plasterboard walls - 150 mm - concrete floors or reinforced concrete floors.

3rdstage.png

Types of partitions where penetration seals
can be made using Piro Wrap PW

FLOOR: Floors built of concrete or reinforced concrete, with a thickness of not less than 150 mm and a density of not less than 1700 kg/m3
 
RIGID WALL: Walls built of concrete, (reinforced, cellular) solid brick, hollow or checkered brick, with a min. thickness of 100 mm or 125 mm and a min. density of 600 kg/m3

wrapbok2aa2.png

Ready-to-use product
to be wrapped

around the pipe.

Ready-to-use
wall1.png

Installation
in walls
along the axis
of the wall

Installation information
floor2.png

Installation
in floors
15 ± 5 mm
from the bottom

wraptop2a.png

Piro Wrap PW is a type of Piro Multitube PM, just like Piro Multitube PM it is mounted inside the partition. Piro Wrap PW is a ready-to-use product, intumescent insert matched to the diameter of a pipe is inside a foil bag, which is wrapped around the pipe. In order to mount the wrap before building the floor or building the wall, it should be put on the pipe in the same way as the Piro Multitube PM by using an cable tie or universal adhesive tape which will keep the wrap on the pipe and prevent it from moving. Piro Wrap PW does not require support, therefore it can be mounted directly on the pipe. For pipes led in a shaft or in technical openings the wraps should be installed before they are walled up. In case of drilled holes, Piro Wrap PW should be wrapped around the pipe and slided to the hole in the partition. The wrap is attached to the pipe by means of an integrated self-adhesive element. Mounting clearance (u = c.a. 25 mm) obtained after drilling in the supporting structure. It is required due to the space needed for mounting (inserting Piro Wrap PW into the hole).

Technical installation

See the examples of
technical installation

5.png
PiroWrap rura PVC Strop 5.png

Check out our other
intumescent wraps

multi.png

Piro MULTITUBE PM

Intended for plastic pipes
Size: 5, 15, 30 (m)

 

epipe whichone.png

Epipe

Intended for cables
Size: ∅50 & ∅110 (mm)

 

Have questions?

A qualified team of Pirosystem can help in the selection of passive fire protection system and other fire protection solutions.

bottom of page