top of page

ETA: ETA-17/1061

CPR: 1488-CPR-0727/W

DoP: PIRO/07-2018-09-10





Service duct for cables and cable bundles

Product data

Product data

Fire resistance class: up to EI 180 C/U, U/C, C/C

Reaction to fire: B-s2, d0

Color: dark graphite

Environment class: Z2

Storage temperature range: from + 5°C to + 30°C

Shelf life: no limit, no longer than 24 months

Packaging: 1 piece

Dimensions: 300 mm x 50 mm, 300 mm x 110 mm



Epipe is simple and effective solution for making fireproof sealing of electric cable penetrations through walls or floors. Epipe fire duct is a plastic pipe with permanently fixed intumescent insert in the form of a polymer tape with an admixture of graphite and other ingredients, causing it to increase its volume under the action of high temperature, closing the hole together with the tube on which it is rolled and cables inside the duct. The principle of operation of the fire ducts is exactly the same as in the case of protection for plastic pipes with the use of fire protection tape. They can also be used to protect small diameter metal pipe bundles in FEF insulation.

Epipe is designed to stop fire and perform fireproof sealing of penetration seal through walls or floors through which single cables or cable bundles pass. The advantage of this solution is the possibility of adding an additional cable or cables even after the complete installation of Epipe in the wall or floor. Epipe is available in two diameters: Ø 50 and Ø 110, which makes it possible to select the perfect duct depending on the needs. For further information see ETA-17/1061.

EPipe zastosowanie 5.jpg
EPipe zastosowanie 5blur.jpg
bottom of page